Sucker Rod Pump-Oil production eq-Oil & Gas EQ-Product-Jiangsu Nantong Yinghuang Energy Technology Co., Ltd

Technical Performance Features

1. The barrel is made of high-quality special tubing with surface strengthening treatments such as chrome plating or nickel-phosphorus composite plating, providing high strength, good rigidity, wear resistance, and corrosion resistance.

2. The plunger surface is spray-welded with nickel-based alloy powder for wear and corrosion resistance.

3. Valve balls and seats are made of high-carbon chrome stainless steel, ceramic, tungsten carbide, or other materials for long service life.

4. High pump efficiency and long pump inspection cycle.

5. Simple structure and convenient installation and use.

Detailed Parameters

Type	Model	Pump bore in(mm)	Plunger Length ft(m)	Barrel Length ft(m)	Tubing OD in(mm)	Sucker Rod Diameter in(mm)	Extension Length ft(m)	Well Condition
Tubing Pump	20/25-106TH	1 1/8 (26.99)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 3/8(60.3)～2 7/8(73.0)	5/8(15.9)～3/4(19.1)	2(0.6)～3(0.9)	The well contains salt, sulfur, CO2, bacteria, corrosive medium and little sand
	20/25-125TH	1 1/4 (31.8)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 3/8(60.3)～2 7/8(73.0)	5/8(15.9)～3/4(19.1)	2(0.6)～3(0.9)
	20/25-150TH	1 1/2 (38.1)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 3/8(60.3)～2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	20/25-175TH	1 3/4 (44.5)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 3/8(60.3)～2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	25-200TH	2 (50.8)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	25-225TH	2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	30-275TH	2 3/4 (69.9)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	3 1/2(88.9)	7/8(22.2)	2(0.6)～3(0.9)
	40-375TH	3 3/4 (95.3)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	4 1/2(114.3)	1(25.4)	2(0.6)～3(0.9)
Rod Pump	20-125RH/W	1 1/4 (31.8)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 3/8(60.3)	3/4(19.1)	2(0.6)～3(0.9)
	25-150RH/W	1 1/2 (38.1)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	25-175RH/W	1 3/4 (44.5)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	25-200RH/W	2 (50.8)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	2(0.6)～3(0.9)
	30-225RH/W	2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	3 1/2(88.9)	3/4(19.1)	2(0.6)～3(0.9)
Long plunger sand control pump	25-125～225TH	1 1/4 (31.8)～2 1/4 (57.2)	11(3.3)～21(6.3)	4(1.2)～7(2.1)	2 7/8(73.0)	3/4(19.1)	/	High sand content well
Bridge linkage pump	25-150～225TH	1 1/2 (38.1)～2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	/	High sand content well
Slim hole pump	25-125～175TH	1 1/4 (31.8)～1 3/4 (44.5)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	/	Casing repair well or slim hole well
Long plunger anti-salt pump	25-125～225TH	1 1/4 (31.8)～2 1/4 (57.2)	11(3.3)～31(9.5)	4(1.2)～7(2.1)	2 7/8(73.0)	3/4(19.1)	/	Severe salt crystallization well
Gas control pump	25-125～225TH	1 1/4 (31.8)～2 1/4 (57.2)	4(1.2)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	/	High gas well
Heavy oil pump with hydraulic rotation	25-150/225TH	1 1/2 (38.1)/2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～22(6.6)	2 7/8(73.0)	3/4(19.1)	/	Heavy oil well
Heavy oil pump with hydraulic rotation	25-175/225TH	1 3/4 (44.5)/2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～22(6.6)	2 7/8(73.0)	3/4(19.1)	/	Heavy oil well
Directional well pump	25-150～225TH	1 1/2 (38.1)～2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	/	Limited inclination well
Directional well pump	25-150～225TH	1 1/2 (38.1)～2 1/4 (57.2)	2(0.6)～7(2.1)	11(3.3)～31(9.5)	2 7/8(73.0)	3/4(19.1)	/	Limited inclination well